How to Install a Self-Sealing Float Switch

Tools required:                 Self-Sealing Float Switch

                                             Tank

                                             Drill

                                             7/8” Drill Bit

 

Step 1:  Select desire location to mount float switch.  Make sure there is adequate room for the inside portion of the float switch will fit in the area selected.

 

Install-float-switch-Step-1

 

Step 2:  Drill a hole using the 7/8” drill bit.

 

Install-float-switch-Step-2a

Install-float-switch-Step-2b

 

Step 3:  Insert self-sealing float switch, make sure the arrow on the switch is pointing down.

 

Install-float-switch-Step-3

 

Step 4:  Hand tighten seal.

 

Step 5:  Take one wire and run it to a ground, take the other wire and hook it up to the ground of the LED (If applicable) or to the yellow wire in your controller.

 

Step 6:  Fill tank with fluid and check for leaks.


coolingmist

In to media

DevilsOwn In the Magazines

DevilsOwn Injection has been featured in endless magazines, websites, videos, and on TV.

Nozzle choose