With this upgrade you get all the fittings needed to upgrade your kit to the benefits of direct injection. This includes the manifold, 1/8" -4AN fittings, -4AN nozzle holders, and 7 12 in stainless steel lines to hook it all up.
The additional nozzles are NOT included.
Direct Port Setup: Why would you want to install a direct port setup? Because injecting equal amounts of water methanol into each cylinder is critical. Also, it could be because you need to distribute the methanol through multiple spots in the motor to achieve better droplet size and better distribution.
Installation: You will want to install the this manifold upgrade after the solenoid. Then, we usually recommend putting each nozzle as close to the cylinder head as possible.
Application: Direct port injection is normally done with 4 (8 feet tubing), 6 (12 feet tubing), or 8 (16 feet tubing) ports.