This kit features a DevilsOwn 2nd Generation Water-Methanol Injection Controller. This kit has a built in 30 psi boost port, which allows you to simply run a boost line to the controller.
This kit features a DevilsOwn 2nd Generation Water-Methanol Injection Controller. Because the kit has a built in 30 psi boost port, you simply run a boost line signal to the controller, wire it up to power, then to ground and finally the pump. You will then be able to increase your boost timing and most importantly, you will have more power. Another new feature of the 2nd Generation Digital Variable Controller is that you can hook up a float level sensor, or any other ground trigger, to one of the controller inputs and it will light up the multi-function LED thereby notifying you of your fluid levels.
The DevilsOwn Progressive Water-Methanol Injection Kits’ main purpose is to suppress detonation caused by high temperature and pressure that has developed in the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point, by either a turbo or a supercharger.
Compressed air is heated air that causes a reduction of power and detonation. DevilsOwn's kit helps lessen any reduction while also increasing fuel mileage. These kits are for situations where you desire the full control of your water injection needs.
Cool the compressed air with the DevilsOwn water-methanol injection kit. Because water has a high latent heat content, it is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in modern lean burning engines. Methanol, with its 116 octane high flash points and specific gravity, helps further reduce the chances of pre-detonation.
Benefits Of Water-Methanol Injection:
- Increase horsepower safely by 10-15%
- Lower air temperatures by 50-200+ degrees
- Increases octane when you need it under boost.
- Reduces cylinder temperatures up to 300+ degrees
- No wear issues only clean combustion chambers
- Allows you to safely run more boost and timing
System Contents Include:
- Completely adjustable digital progressive controller
- 300 psi recirculating pump with EPDM seals
- Heavy duty check valve
- 15 ft of black high pressure nylon tubing
- 2 Micro droplet nozzles DO3,DO7
- Filtered self sealing tank tap
- boost line, T-fitting and reducer
- All necessary hardware
- Detailed Instructions
Methanol water injection faq's
Stage 2 Water methanol injection instructions
DevilsOwn Injection stands behind their parts and warrantees this system to be free of defects for up to 1 year after purchase. Refer to our warranty page for complete details.