Customizable 2.5 Bar Stage 2

Customizable 2.5 Bar Stage 2 New Maximize

This kit features a DevilsOwn 2nd Generation Water-Methanol Injection Controller. It is designed for 1 wire hook up to an 2.5 bar map sensor.  See description below for nozzle size choices.

More details

Availability: Backorder


Shipping Rates

Share on Facebook

Check this kit out! From us to you, this is the DevilsOwn© second-generation water–methanol injection controller. This kit is designed for a 1 wire hook up to a 2.5-bar map sensor. We want you to have an easy time with this so you can have more time burning tires then reading instructions. To hook this up, run a map sensor signal to the controller, wire it up to power, ground the wire, and then run the wire to the pump. How simple is that? Our customers hook this up quickly and are on the road in no time. As many of you know, this kit will increase your boost timing, and most importantly, you’ll have more power! Another cool feature of the 2nd generation digital variable controller is the ability to hook up a float level sensor, or any other ground trigger, to one of the controller inputs and it will light up the multifunction LED light. This light notifies you of your fluid levels so you aren’t caught with your pants down.

The DevilsOwn© Progressive Water-Methanol injection kits main purpose is to suppress detonation caused by high temperature and pressure that has developed in the combustion chamber. This is achieved when the effective compression ratio has been taken beyond the auto-ignition point. We want this process to be easy to understand, and our customers should know this kit is good to go in a turbo or a supercharged engine.

Compressed air is heated air that causes a reduction of power and negatively affects detonation. DevilsOwn© kits aid in reducing power loss while increasing fuel mileage. These kits are for applications where you desire the full control of your water injection needs.

Cool the compressed air with the DevilsOwn© water methanol injection kit. Because water has a high latent heat content, it is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in modern lean burning engines. Methanol, with its 116 octane high flash points and specific gravity, helps further reduce the chances of pre-detonation. In short, you get lower air temperatures and reduced stress on your engine. As an added benefit, you clean chambers with increased octane. Awesome? Hell yeah!

The Short and Sweet Benefits:

  • Increases horsepower safely by 10-15%
  • Lowers air temperatures by 50-200+ degrees
  • Increases octane when you need it under boost.
  • Reduces cylinder temperatures up to 300+ degrees
  • No wear issues only clean combustion chambers
  • Allows you to safely run more boost and timing

System Contents Include:

  • 2.5 Bar Progressive Controller
  • 300 psi pump with EPDM seals
  • Black anodized 16 psi check valve
  • 20 ft of black high pressure nylon tubing
  • 2 Micro droplet nozzles (DO3, DO7) *nozzle sizes may be substituted upon request*
  • Filtered self-sealing tank tap
  • All necessary hardware
  • Detailed Instructions

Important Notes:

  • Basic hand tools required for installation
  • Proper tuning is required to achieve maximum results
  • Typical install time 2-3 hours


Methanol water injection FAQ's

Stage 2 Water methanol injection instructions


DevilsOwn© Injection stands behind their parts and warrants this system free of defects for up to 1 year after purchase. Refer to our warranty page for complete details.

Facebook comments


only logged users can upload product photos click here to login


No videos uploaded


In to media

DevilsOwn In the Magazines

DevilsOwn Injection has been featured in endless magazines, websites, videos, and on TV.

Nozzle choose