Evo Stage 2

Devilsown Alcohol Injection customized a system for the Evolution VIII. This system utilizes a GM 3 bar map sensor that give our progressive controller 0-5v source. This is for the person who wants to have full control of their alcohol/water injection needs.

DevilsOwn Progressive water alcohol injection systems main function is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by a turbo. Compressed air is heated air which causes power robbing and engine destroying detonation.

Cool the air with the DevilsOwn alcohol water injection system! Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern lean burn engines. Methanol with its 116 octane and high flash point and specific gravity further reduce the chances of detonation.

Benefits Of Water/Methanol Injection: Increase horsepower safely by 10-15% Lower air temperatures by 50-200+ degrees Increases octance when you need it under boost. Reduces cylinder temperatures up to 300+ degrees No wear issues only clean combustion chambers Allows you to safely run more boost and timing System Contents Include: Completely adjustable digital progressive controller 250 psi pump with EPDM seals Heavy duty nickel plated check valve 15 ft of black high pressure nylon tubing 2 Nickel plated nozzles DO3, DO5 All necessary hardware Important Notes: Requires only basic hand tools to install with the exception of a 1/8 NPT tap Proper tuning is required to achieve maximum results Installation time approx. 2-3 hours Warranty: DevilsOwn Injection stands behind there parts and warrants this system free of defects for up to 1 year after purchase. Refer to our warranty page for complete details.

Progressive Controller dvl-2003 The electronic progressive controller represents the latest technology in water/methanol system control. The dvl-2003 is designed to increase injection pressure over a user adjustable range and quickly shut off when boost pressure drops to prevent misfire. 250 psi Alcohol-Water Pump Long lifetime, 10+ Millions cycles No lost in pressure even with high volumes Dry run up to 1 hour 50% Methanol-compatible EPDM Diaphragm High Volume pump 150 to 250psi Output Misting Nozzle Unsurpassed atomization due to superior nozzle design. Consistently deliver superior, long-lasting, trouble-free performance. Intergrated O-ring for leak free seal.

Common Questions about our Evolution VIII Injection Kit.

What size nozzle do i need?

Our kits comes with the 2 most common sizes of nozzles for an Evolution VIII. There are many factors effecting nozzle size such as engine size power adder, Intercooled or non intercooled and level of boost you are running. What works for 1 car is not always best for another.

What all comes with this kit?

This kit assumes you are mounting this in your engine bay and are using your factory washer tank in the trunk or have provided your own tank. So it comes with 20ft of tubing. This kit comes with hardware, electrical connectors, Gm 3 bar map sensor/pigtail and fittings need to install this kit. Our progressive kit will need nothing to completely install this kit.