Yes, I got instructions but there are some differences between the instructions and diagram and the parts I got.
I got 2 RA large tubing fittings for the pump not 1 RA and 1 straight. not a big deal. It will work either way.
I got 1 RA small tube adapter (for the tank) but also got 1 small straight version. I have no idea where it goes.
My kit included a filter and 2 tubing adapters but the instructions don't show the location in the system to locate the filter. Near the tank? Pump? Nozzle?
The
check valve has barbed ends, not threaded like the diagram so I was wondering if the tube needed to be clamped or if just pushing the tube over the barbs was enough.
I also got the chrome plated, upgraded nozzle holder and will be mounting it in silicone coupling. It is thick but more pliable than plastic or aluminum ductwork and wanted to know more about mounting it. It looks like it would get squeezed between the nozzle and the holder body. The silicon coupler is not hard enough to allow screwing the holder into it.
The kit had 2 m5 nozzles instead of 1 m3 and 1 m5.