Devilsown Methanol Alcohol Water Injection - View Single Post

ICE_T · 11-07-2006

I don't see too much DSM with the same or similar setup has me.!!

So my question, what kit or pump I should run.

setup:
stock 2.0l 6bolt engine, 7500-7800rpm rev.
scm-61BB (GT35R) good for 600HP
stock 2g piston compression 8.5:1
3inch exaust, fmic, 780cc injector
dsmlink, wideband o2, and all supporting mods, to reach or run 400WHP with pump gas, over 24-25psi of boost on the street.

So, I know the 150psi pump will do the job for my goals. I will put only one nozzle before the thortle body, so I calculate with the nozzle calcultaor and it give me 5.99gph? that's right or not for my goal??

so I just want to know wooch kit you will take if you have my car/setup.

thx

11-07-2006	#1 (permalink)
ICE_T Water Injection Join Date: Nov 2006 Posts: 15	questions I don't see too much DSM with the same or similar setup has me.!! So my question, what kit or pump I should run. setup: stock 2.0l 6bolt engine, 7500-7800rpm rev. scm-61BB (GT35R) good for 600HP stock 2g piston compression 8.5:1 3inch exaust, fmic, 780cc injector dsmlink, wideband o2, and all supporting mods, to reach or run 400WHP with pump gas, over 24-25psi of boost on the street. So, I know the 150psi pump will do the job for my goals. I will put only one nozzle before the thortle body, so I calculate with the nozzle calcultaor and it give me 5.99gph? that's right or not for my goal?? so I just want to know wooch kit you will take if you have my car/setup. thx Last edited by ICE_T; 11-07-2006 at 04:30 PM.