Devilsown Methanol Alcohol Water Injection - View Single Post

Rocket468 · 04-30-2007

Yea, you can mount the nozzles in the plate, Just drill 11/32 and run a 1/8npt tap thru it. Same size you would for nitrous.. Then just thread the nozzles in and your golden.

I would personal run a dual nozzle setup and run 2 m10. I would run them front and back vers one on each side because you might hit the linkage.

04-30-2007	#5 (permalink)
Rocket468 DevilsOwn Staff Join Date: Apr 2005 Posts: 1,150	Re: question about your kits Yea, you can mount the nozzles in the plate, Just drill 11/32 and run a 1/8npt tap thru it. Same size you would for nitrous.. Then just thread the nozzles in and your golden. I would personal run a dual nozzle setup and run 2 m10. I would run them front and back vers one on each side because you might hit the linkage.