Devilsown Methanol Alcohol Water Injection - View Single Post - map output wiring on progressive controller

RJW · 05-05-2007

I just received the universal progressive kit.

Intructions state that with ignition on and car not running, to hook up the green wire from the controller to the map wire with .02 v.

On my car (with Haltech ecu), it had to be hooked to the map wire with .5v which in the instructions, it clearly states not to. I wonder if it is a typo.

Map wires read .01 (on ground wire), 5v on supply wire and .5v on middle wire, which the Hlrtech wiring diagram descibes as the outpu.

So, when in doubt, read the manuals.

btw....the system seems to be working , but needs tuning.

05-05-2007	#1 (permalink)
RJW Water Injection Newb Join Date: May 2007 Posts: 10	map output wiring on progressive controller I just received the universal progressive kit. Intructions state that with ignition on and car not running, to hook up the green wire from the controller to the map wire with .02 v. On my car (with Haltech ecu), it had to be hooked to the map wire with .5v which in the instructions, it clearly states not to. I wonder if it is a typo. Map wires read .01 (on ground wire), 5v on supply wire and .5v on middle wire, which the Hlrtech wiring diagram descibes as the outpu. So, when in doubt, read the manuals. btw....the system seems to be working , but needs tuning.