 2.5 Bar Map Question
Well I got my progresive kit installed and working good, just have to tune the car a bit more. I found that my car has a 2.5 bar map sensor, my controler is for a 2 bar map. So I don't really know where to set the controller to make it come on and set the max flow point. Is there a calculation I can use to make it come on at 8 psi and max at 13 or 14? I just don't know the conversion, I know what the conroller says won't be the same as it really is.
Also the Full light flickers a bit under WOT, is that correct? The yellow light stays lit under WOT.
__________________
2005 Cobalt SS Turbocharged
T3/T04E 50 trim
|