Devilsown Methanol Alcohol Water Injection - View Single Post

Rocket468 · 05-18-2007

I finaly go my hands on alldata. You need to have it hooked up to pin#4 or the dark grey wire. This is the 0-5v output wire.

I am still worken on finding the scale of the map sensor.
I know the cut off is 4.9v would should read 22psi or 15 on our controller.

These are aproxmate
5psi on our controller will be 8psi.
9psi on our controller will be 14psi

I will try to run up to the dealership and buy one so i can get you an defnate answer.
We have faceplates that read in voltage i can send you out if you like.

05-18-2007	#7 (permalink)
Rocket468 DevilsOwn Staff Join Date: Apr 2005 Posts: 1,150	Re: 2.5 Bar Map Question I finaly go my hands on alldata. You need to have it hooked up to pin#4 or the dark grey wire. This is the 0-5v output wire. I am still worken on finding the scale of the map sensor. I know the cut off is 4.9v would should read 22psi or 15 on our controller. These are aproxmate 5psi on our controller will be 8psi. 9psi on our controller will be 14psi I will try to run up to the dealership and buy one so i can get you an defnate answer. We have faceplates that read in voltage i can send you out if you like.