Alky worked for a day - now blink blink blink.
I have a Regal GS. I installed the alcohol, connected the controller to the power drop, and grounded the pump on the neg. battery terminal. Everything was fine for a day, except that DIC boost guage showed more boost (2-5 pounds more).
Then, I was driving on a highway, and gave it some gas to pass someone, boost guage showed 0.0, I looked over at the controller, and it seemed to be completely dead (no power).
I got home, "restarted" the car, and boostguage started showing numbers again, and controller had the power light again. *Yay*
Sadly, after this, whenever there's "boost", the controller starts blinking yellow.
I checked the pump (works), changed the ground wire. Checked the plugs on the pump, replaced the wire going from pump to controller, and even hooked up the controller to battery on the powerdrop.
Still the same results.
p.s i took off my supercharger belt, and then revved the car, the controller did not blink (obviously lack of boost, but i was curious)
Any suggestions?
|