View Single Post
Old 07-05-2007   #10 (permalink)
JasonZ31
Water Injection Newb
 
Join Date: Jul 2007
Posts: 11
Default Re: Progressive install Nissan Primera (sr20det)

Quote:
Originally Posted by jpsr20det View Post
HI man thanks..its my weekend warrior ( if you know what I mean) that its right its a z32 maf my ecu its a re chiped one with 2 piggybacks afc and a itc I have never ear of Nistune ,can you go morein deep about it?
One question man.. what do the volt points in the controler traslate into boost?thanks.
That's just a freaking sweet setup you have there; should be able to test the limits of your bottom end... while really turning some heads. Got traction?

Volts from a maf dont really translate into boost, they translate into airflow. This correlates according to the VQmap voltage qualifier) for your particular MAF. The N62 maf for instance has a different vqmap than N60 does, so they wont interchange unless you swap the map as well, or use an AFC. Using your AFC on top of a pre-packaged tune works well (I did it for a little while on my 84). I just noticed SR20 is not currently one of the supported platforms... This is what Nistune consists of: NIStune Nissan Real Time Tuning System
It's no standalone, but it has a lot of the functionality of one. I'm not sure when, but they will be

Last edited by JasonZ31; 07-05-2007 at 10:46 PM.
JasonZ31 is offline   Reply With Quote