Devilsown Methanol Alcohol Water Injection - View Single Post

Talontsi96 · 07-08-2007

I got a 9:1 Compression 2.4 4G64 Swap... Ross pistons, eagle rods. I notice that when I had the M12 nozzle the car would miss a whole bunch. With the 7M nozle its not bad at all.. I really do not feel any missing but 20 PSI seems to be about all I can muster, with or without W/I/. I'm injecting about 50/50 water/meth... At 20 PSI I flow over 40lb/min of air with the SCM61.. I think I got lots of tuning ahead of me. I was hoping I could run about 25+ PSI.. on pump.

07-08-2007	#5 (permalink)
Talontsi96 Alcohol Injection Join Date: Jun 2007 Posts: 50	Re: Injection on/off no real difference I got a 9:1 Compression 2.4 4G64 Swap... Ross pistons, eagle rods. I notice that when I had the M12 nozzle the car would miss a whole bunch. With the 7M nozle its not bad at all.. I really do not feel any missing but 20 PSI seems to be about all I can muster, with or without W/I/. I'm injecting about 50/50 water/meth... At 20 PSI I flow over 40lb/min of air with the SCM61.. I think I got lots of tuning ahead of me. I was hoping I could run about 25+ PSI.. on pump. __________________ stroked and blown Last edited by Talontsi96; 07-08-2007 at 07:18 PM.