mods on the car:
3.0" pulley
AFC 2.2(7=98,8=99,9=101,10=102,11=101)
Happy knob@18* advance timing
DHP PCM w/custom tune
4"FWI w/LQ4 MAFF
1.9 stock modified rockers
PLog/Rear PEM/3"DP/3"catback
M3 alcohol nozzle with 1/4" ID hose lines
Pump pressure on Shurflo 100PSI is about 3-4 turns from the bottom-up on the adjuster screw
Progressive Controller settings- turn on at ~1PSI, MAX KNOB set at 15PSI
right now my PLX WB registers "RCH" or rich at WOT. i get no KR with just a blip of knock <1* but im betting its cause im running too rich. is there any way for me to adjust the alcohol more? i tried turning the adjuster screw on the pump clockwise(tighten) but it appears nothing changed? i am thinking about swapping to possibly an M2 nozzle. thanks in advance.