Devilsown Methanol Alcohol Water Injection - View Single Post

Rocket468 · 07-31-2007

Not sure how i missed this thread :(

I find it easiest to just put a nozzle in the spacer. And injecting thru the blower. I am at the opion that its luck of the draw on the teflon coming off. Bial ran afew bottles of 100 shot thur his, propane, alcohol etc. His had over 100k and still looked realy good. I have seen local guys that have ran nothing and the rotors are striped. So i feel its just luck of the draw.

07-31-2007	#4 (permalink)
Rocket468 DevilsOwn Staff Join Date: Apr 2005 Posts: 1,122	Re: L67 nozzle location & question Not sure how i missed this thread :( I find it easiest to just put a nozzle in the spacer. And injecting thru the blower. I am at the opion that its luck of the draw on the teflon coming off. Bial ran afew bottles of 100 shot thur his, propane, alcohol etc. His had over 100k and still looked realy good. I have seen local guys that have ran nothing and the rotors are striped. So i feel its just luck of the draw.