Devilsown Methanol Alcohol Water Injection - View Single Post

deff · 08-27-2007

I've almost finished my install of the base kit on my SRT-4, but I've ran into a problem.

Right now, my pressure switch isn't activating at all. I've got it hooked up to a line coming straight off my turbo, but it seems it doesn't provide enough pressure to push the piston on the switch.

I used a can of air to test to see if the piston was seized or something, but it moves just fine. Any ideas?

08-27-2007	#1 (permalink)
deff Water Injection Newb Join Date: Aug 2007 Posts: 5	SRT 4 pressure switch issue I've almost finished my install of the base kit on my SRT-4, but I've ran into a problem. Right now, my pressure switch isn't activating at all. I've got it hooked up to a line coming straight off my turbo, but it seems it doesn't provide enough pressure to push the piston on the switch. I used a can of air to test to see if the piston was seized or something, but it moves just fine. Any ideas?