Devilsown Methanol Alcohol Water Injection - View Single Post

PTReg · 08-28-2007

If the switch seems to be working could it maybe be the electrical side of the setup, not necessarially specific to the electrical part the preasure switch plays in the system. Switch could be working as intended but might be something somewhere else in the system. You probably have already done it but maybe double check the rest of the system again if necessary. Just my thoughts on it, but you can trouble shoot sections of the electrical with a 12v trouble light. If I remember correctly your tubo (similar to my PTturbo) has two pressure source lines comming of it. Either should provide good enough pressure to activate the switch. Anyway not sure what else to say other than double check everything.

08-28-2007	#3 (permalink)
PTReg Water Injection Newb Join Date: Dec 2006 Posts: 3	Re: SRT 4 pressure switch issue If the switch seems to be working could it maybe be the electrical side of the setup, not necessarially specific to the electrical part the preasure switch plays in the system. Switch could be working as intended but might be something somewhere else in the system. You probably have already done it but maybe double check the rest of the system again if necessary. Just my thoughts on it, but you can trouble shoot sections of the electrical with a 12v trouble light. If I remember correctly your tubo (similar to my PTturbo) has two pressure source lines comming of it. Either should provide good enough pressure to activate the switch. Anyway not sure what else to say other than double check everything.