Devilsown Methanol Alcohol Water Injection - View Single Post - Continued Problems with Controller (SOLVED)

FYX193 · 09-11-2007

I have continued to have problems getting my controller to work properly. I have tried using it with a 3.5 bar Zeitronix map sensor, as well as the stock SRT-4 2 bar map sensor. No matter what I do, the controller will seem to work momentarily, then it will start flashing the yellow led (due to a fault).

I have noticed that my water line has not ever received pressure because the D.O. gauge with snubber, has always shown zero psi. All wires are soldered together, and the grounds are made to factory ground locations. I am clueless as to what is at the root of this problem.

09-11-2007	#1 (permalink)
FYX193 Water Injection Join Date: Jun 2007 Posts: 24	Continued Problems with Controller (SOLVED) I have continued to have problems getting my controller to work properly. I have tried using it with a 3.5 bar Zeitronix map sensor, as well as the stock SRT-4 2 bar map sensor. No matter what I do, the controller will seem to work momentarily, then it will start flashing the yellow led (due to a fault). I have noticed that my water line has not ever received pressure because the D.O. gauge with snubber, has always shown zero psi. All wires are soldered together, and the grounds are made to factory ground locations. I am clueless as to what is at the root of this problem.