hmm ic, i was only trying to be inventive lol. gibson from the clubgp tapped both sides of the LIM but i havent heard anything from his experience of them mounted there. i already have a bung plug in place of the fitting/nozzle in the LIM. i am confident though, there was no tap that would clog the nozzle since it was working for a bit(saw barely any KR) until i noticed i was getting a sudden amount of KR and knew theres a leak that started. right now again im running the M3 nozzle(what actual size is that btw?) in the tb spacer. running the 3.2" pulley, and have the controller set as follows:
PSI turn on at 3.5#-4# and Max PSI at ~14.5. is that a decent range? heres a scan i have that i loggegd recently although not 100% throttle applied.
NannyLog(11.22.2007_13.11.28). from fst100 -- Scan Depot dot net