 Re: WI as a cleaner?
Thanks for the help guys,
So I'll get the regular universal kit, does that come with the 3gph nozzle? I think that the crossover pipe might be thinner than 1/8th of an inch, more like sheet metal thickness, would I still be ok? Perhaps I could thread a thin nut on either side with a high temp o-ring to seal it up and lock it down if it turns out to be too thin to tap.
Dust - I'm in Seattle now but I just moved from Montana. I bought the engine from a guy who imported it via Jarco when you could still get complete half-clips into the US. I understand that that is no longer legal although everything is still available, just not bolted into the frame. The 1KZTE is a hell of an engine and probably a little more solid than the 2l-te. That's what I would have gone with in a second if I had the money, my engine was about $3,000 less then a KZT clip. I think they are drop ins for the 96 and newer Taco and Runners with the 6 cylinder engines and there is a guy in the states who will do the wiring harness for about $500 so the hardest part of the swap is pretty much a non-issue now. Wow, now I'm rambling, thanks for the info...
Dave
|