Quote:
Originally Posted by Quiksilverss  I finished the install of the methanol kit last night. I followed the instructions and am sure the wiring is connected correctly. I have the red light on the controller come on when I start the car and it remains on. The controller also blinks 2 times and then 1 time really fast with the yellow light. I am aware this signifies the 2.5 Bar controller. When I hot the gas under acceleration the green lights up, but also so does the yellow, it doesnt go full yellow just kinda blinks under acceleration and then goes off after I am off the gas. I have checked the wiring and it looks good, grounded correctly, all the wires to the appropriate spots, have it tapped for a ignition source with a 10A fuse in line. I cant seem to figure it out any suggestions? could it be a fualty pump? |
The red light will always be on when the system has power. The green light will be on when your spraying and the yellow light is on letting you know when your spraying 100% or close to it. So when its spraying at 100% all three lights will be on. Not the best explanation but I hope it helps. Im sure rocket or dvldoc will chime in to better explain it but it sounds like your setup is working fine cause the yellow light is supposed to come on.