[dvldoc]

Pre turbo injection has not proven to have caused excessive were, You can find about 2 photos of any damage on the whole internet. Neither have any before shots. If you atomize the solution with a high pressure pump such as ours, Were talking 200+ psi with the nozzle sizes you guys will be using and it is a true fog.

You guys have a very short turbo to intake track in most cases less than a 1/2 meter so it would benefit, not to mention the meager size of the turbos there. In my opinion on most of these vehicles they will benefit from pre-turbo injection we will test the differences with the G-tech pro SS and see if there is any performance gains or loses vs Post turbo.

There are many people stating use of pre turbo injection for years with no issues. To many people say it will damage without having see or tested anything. I had a guy running a kit here with it but found out later he had been running without a filter for a few weeks, Coral roads will trash a turbo quick with no filter.

But post turbo is just as easy on these vehicles and your still get that nice kick because of the temp drop. Overseas Turbo diesels are some of the easiest vehicles to install just take install the nozzle in the hose or pipe right before the manifold and your done. I have a pretty big collection of pics of pretty much every TD motor used there.

We will be doing both pre-post turbo installs at Clark on the 22nd. We'll have plenty of date to post up after this event for sure.

Just avoid getting methanol on you when at all possible, You can get 5 gallons for 750P which is pretty cheap, Plus you can buy ethyl alcohol in just about every pharmacy and SM grocer there as well. You can get Denatured in most paint shop there as well. We're bringing Methanol to the event purchased in the Philippines as well as ethanol as well. I especially want to see if there is a difference between the two alcohols on the vehicles.

See you in the Philippines on the 22nd Dusty