About timing..
Can anyone tell me about adjusting timing at no boost-low boost 0-10psi and max boost, in my case 16-17 psi.
I will be turning up boost from 16-17 to about 20-22 psi.
Also i'm thinking to set the
Progressive Controller to start spraying at 11psi and running full spray at 22psi when i'am running my water/meth map.
where and when should i retard and advance.
Totally blank when it comes to timing.
I've done all the mapping on the MapEcu2 my self and car runs great, so i just want to know how i should adjust timing,and how much.