Quote:
Originally Posted by chevy1500z71  the pump does not kick nor does the light light up, it does nothing but the power light is on.
i used a volt meter and i got 1.22v off of the grey and 1.25 off of the green, and inside the truck i get .5v on the blue that goes to the pump and 1.11 off of the grey that goes to the map?
does that sound close to right or way off? |
If your getting 1.22 v off the grey wire then the unit has been damaged. It should read 5v +-5% . The green wire of the controller is an input It can't produce voltage. I would assume are getting the voltage from the map sensors green wire. please email
support@alcohol-injection.com for a warranty paperwork.