Devilsown Methanol Alcohol Water Injection - View Single Post

Mel Adjusted · 04-25-2008

I hear ya... were running direct port spray to each cylinder. I have dual throttle bodys so would it be better to injet before the throttle bodys? I figure we run between 2 and 2 1/2 bar (equivalent) of oxygen bearing air and 14.5:1 compression ratio.
I need to figure how to inject Water/alcohol progressively as we run the spray in 3 stages.
Right now were running in the hi 9s in the 1/4 and I know if we can tweek the timing and mixture and put the car on a diet we might dip into the low 9's or hi 8's.

04-25-2008	#3 (permalink)
Mel Adjusted Water Injection Newb Join Date: Jan 2008 Posts: 7	Re: N2O spraying I hear ya... were running direct port spray to each cylinder. I have dual throttle bodys so would it be better to injet before the throttle bodys? I figure we run between 2 and 2 1/2 bar (equivalent) of oxygen bearing air and 14.5:1 compression ratio. I need to figure how to inject Water/alcohol progressively as we run the spray in 3 stages. Right now were running in the hi 9s in the 1/4 and I know if we can tweek the timing and mixture and put the car on a diet we might dip into the low 9's or hi 8's. __________________ *The Surgeon General says, "Smoking V8's is OK"* http://mel-adjusted.zoints.com/