 Re: N2O spraying
Our 1st stage is a Zex dry system using a air intake amplifier with a 75 HP shot of spray. The 2nd stage is a wet system with a 25 HP shot to each cylinder, and the 3rd stage is a wet system with a 50 HP shot to each cylinder.
I don't need a W/A injection for the 1st stage but for the 2nd and 3rd yes.
If you look at spraying as liquid or chemical supercharging it makes working with the engine much simpler. We started by converting how much air a turbo put into a engine and how much fuel was required for best power and went from there.
Now if we can just control our combustion chamber temps with W/A injection our only limiting factor will be pushing the crank out the oil pan (blowing the engine).
I figure we'll need 6 gph W/A for our 2 stage and 13.5 gph for our 3rd stage. that shouldn't be that hard to pull off. |