Quote:
Originally Posted by Gent  Dvldoc, would a 2.5 bar controller work with my system - isn't it above my car's range? |
These are the specs I know on the smart car, Since it boost to 16.7 then it will have greater than a 2 bar sensor. Same as VW TDI motors they all run a 2.5 bar map sensor. We always reference before we give you info.
Engine (gasoline)
Three cylinders inline - gasoline/turbocharged
11 psi boost nom, 14.5 psi overboost
Two spark plugs per cyl
Cubic capacity: 599cc.
Bore x stroke (mm): 63.5 x 63.0.
Compression ratio: 9.5:1
Valve gear: Two valves per cylinder.
Max power (bhp): 54 (61 on overboost) at 5250 rpm.
Max torque (lb.ft): 65 at 2250 - 4500 rpm. (71 on overboost)
Diesel (Canada)
799 cc three cylinder turbodiesel
Bore x stroke (mm) 65.5 x 79.0
40.2 hp @ 4200 rpm
73.8 lb-ft torque at 1800-2800 rpm
18.5:1 c.r. 16.7 psi boost