Devilsown Methanol Alcohol Water Injection - View Single Post

Todd · 05-16-2008

Hi Guys,

I'm setting up a universal progressive diesel system on my 91 7.3L F350. As you know these trucks don't have a MAP I'm adding a 2 bar sensor. What I need to know is how to wire it up. I know that the grey wire is used to provide 5v to the MAP & the green wire gives signal back to the controller but which terminals do they go to on the MAP. The 3 pins on the MAP are marked C B & A. What goes where??

Thanks,
Todd

05-16-2008	#1 (permalink)
Todd Water Injection Newb Join Date: May 2008 Posts: 6	MAP wiring Hi Guys, I'm setting up a universal progressive diesel system on my 91 7.3L F350. As you know these trucks don't have a MAP I'm adding a 2 bar sensor. What I need to know is how to wire it up. I know that the grey wire is used to provide 5v to the MAP & the green wire gives signal back to the controller but which terminals do they go to on the MAP. The 3 pins on the MAP are marked C B & A. What goes where?? Thanks, Todd