Quote:
Originally Posted by rdsnake93  What kit would I use for a non forced induction car, just running a normal carb car...but it a built 347 stroker, took her to the track she ran 11.30 @ 117 but think it has more in it..
Need help |
The universal stage 1 kit with a voltage faced controller with a DO4 or DO5 nozzle should do the trick for you to give you some extra power along with increasing your timing the extra octane and reduced intake temps should make for a few tenths extra in the 1/4.
You would just need to get a GM 1 bar map sensor to make it work, they are dirt cheap on ebay, we only carry 2bar and 3bar. But we do have the map sensor connectors in case you need one.
The controller has a 5v output wire so it can power and read the MAP sensor independent of the vehicle. All you need to do is hook up a vacuum line to it.
I would run 100% to 75% methanol in it.
Our new nozzles make it easy to tap a carb spacer to mount them or a intake manifold.