Quote:
Originally Posted by Spyrious  Here in Greece it gets in Summer up to 40C easy.My car has a Intercooler.My max turbo pressure is 1.2bar.Will the 2 bar controller suffice?I'm not planning on dual nozzle install.
Does the Tank include the tube fitting?Can i wire the level sensor to cut off the power to the pump once the tank is empty?
Thanks |
You could use the level sensor to cut the power to the pump but most people just hook it to a LED or indicator light to let you know your running low and need to refill.
Since your running 1.2 bar (17psi) I am assuming you have used a boost controller to raise your stock boost to that level this would mean your stock sensor would only be a 2bar in most cases. It could be a 2.5bar as many euro cars like Audi and VW are.
You would have to check the voltage scale to see for sure.
The kit comes with everything you need to tape the tank as well as 15 feet of turbing, You might want to order 5 feet more if you plan on mounting it in the trunk. Sometimes routing the hose is not a strait shot to the tank. The last thing you want to do is come up short on hose.
THis is the voltage scale our controllers operate on for 2 bar and 3 bar i don't have the scale on hand right now for the 2.5 bar but i believe 17psi is 3.75 volts. But most likely it is a 2 bar sensor.
