Devilsown Methanol Alcohol Water Injection - View Single Post - Meth Injection and Fuel Cut Rev Limiters?

MR T · 06-10-2008

I have been thinking about this possable issue that might come up when using fuel cut as you rev limiter . I my self run a Aem Ems so I can only cut ignition to limit revs but lets say i had it set to fuel cut . Once i reach my desired rpm the main injectors will cut fuel ( which will also most likely give me zero boost )
But is there any chance it could run lean long enough due to the fact that it is still injecting meth ?
I dont think it is possable because the boost will be very low if not any at all and the system should shut off at that point .
I would just like to here other opinions on this .

06-10-2008	#1 (permalink)
MR T Water Injection Newb Join Date: May 2008 Posts: 4	Meth Injection and Fuel Cut Rev Limiters? I have been thinking about this possable issue that might come up when using fuel cut as you rev limiter . I my self run a Aem Ems so I can only cut ignition to limit revs but lets say i had it set to fuel cut . Once i reach my desired rpm the main injectors will cut fuel ( which will also most likely give me zero boost ) But is there any chance it could run lean long enough due to the fact that it is still injecting meth ? I dont think it is possable because the boost will be very low if not any at all and the system should shut off at that point . I would just like to here other opinions on this .