[ebanks89]

just hooked up my progressive kit this past weekend with the DVC-30 controller, I don't know if its something I hooked up wrong or this was made like this on purpose! when the kit kicks into full pump my factory fuel light comes on and stays on until I get off the pedal, the power that supplies the Devilsown pump is the factory fuel pump, tapped from my trunk, any ideas!

thanks, ebanks89

[tweak'e]

self explanatory i think. don't use the factory fuel pump feed to power the pump. run a feed direct from battery.

[dvldoc]

He said it, The pump should be hooked to your battery.

[ebanks89]

so could I tap into my power from my fuel pump re-wire kit, it goes straight to the battery?

[ebanks89]

I ran a 14 gauge wire from the pump to the battery but it turns the pump on constantly! any Ideas?

[raveneon]

Originally Posted by ebanks89 I ran a 14 gauge wire from the pump to the battery but it turns the pump on constantly! any Ideas?

Do you mean that literally? If so you have bypassed the relay or Progressive Controller. You need to hook the 14ga wire from the battery to the relay/controller not the pump.

[ebanks89]

it's good now chance sent me some updated instructions & it's perfect now no knock @ 28 lbs of boost in 85 degree weather.