peugeot 306 d-turbo

bruce-m · 11-19-2009

I've sent you a PM explaining it all.

Mike · 11-19-2009

Ah, I was enjoying this thread.

Dust · 11-24-2009

Originally Posted by bruce-m

With the current top mount, mount the pre turbo as close as possible and mount the DO3 just before the IC.

With the FMIC again mount the pre turbo as close as possible to the turbo and mount the DO3 about 6-8inches away from the inlet manifold after the IC.

What info do you have on a pre-IC nozzle? Most will not recommend mounting a nozzle before the IC.

bruce-m · 11-24-2009

On the std 306 the top mount IC is as good as part of the inlet manifold, you'd really only be able to do direct port if you were going to mount the nozzle after it, which is why I've said go pre.

Plus its so tiny its as good as not having one.