Registration is free.
Join us today.
Basic kit on a SRT-4
This is a discussion on "Basic kit on a SRT-4" within the Install Pics forums. This forum, and the thread "Basic kit on a SRT-4 "are both part of the Videos & Pictures category;
 |
| | LinkBack | Thread Tools |
10-10-2007
| #1 (permalink) |
| Water Injection Newb Year: 2003 Make: Dodge Model: SRT-4 Join Date: Oct 2007
Posts: 12
|  Basic kit on a SRT-4
The pump  The nozzle/checkvalve. Yes, I used a TON of silicon sealant!  Another view of the nozzle/checkvalve  A picture of my dirty ass engine (needs a cleaning):  So far I'm VERY pleased with this kit. For $199 you honestly can't go wrong if you're having some detonation, timing being pulled, or just want some awesome cooling. I run this with my AGP race FMIC and my IATs never hit above 75* when moving. Prior to the kit, I'd see IATs around 105* or so, and even that is fantastic when compared to output turbo heat. Right now I moved from straight distilled water to about 70% distilled water and 30% HEET from Wal-Mart and it's been great. When I find a good race shop around, I'll be picking up some 50/50 of true meth/water mixtures. I'm going to be getting the Progressive Controller soon and will also be going to a dual-nozzle setup. Right now my boost is street set to 24 psi and I'm getting about 30 degrees of timing and 0 KR. |
|  |
|
11-16-2007
| #3 (permalink) |
| DevilsOwn Tech Year: 86 Make: Buick Model: T Type  Join Date: Oct 2005
Posts: 644
 | Re: Basic kit on a SRT-4
you can always go with this... Ive tried it and it works great...  50/50 water/methanol Brew DevilsOwn Injection |
|
| |
