[batman]

this is my jeep i want to installed a methanol kit is normally aspirated. wich one i should use and wich size of nozzle.

thanks

[dvldoc]

Stage 2 universal kit with a D02 nozzle with the pump set to 250psi. You will use the voltage controller and run it off the MAF sensor.

[batman]

ALREADY HAVE THE PUMP AND NOZZLE, I ONLY NEED TO BUY THE VOLTAGE CONTROLLER. WHAT CONTROLLER I NEED, VoltageController
Intended to be attached to an 0-5 Volt Sensor OR DVC-30 Controller
Intended for any boosted application. Built In 30 psi map sensor.

[dvldoc]

Originally Posted by batman ALREADY HAVE THE PUMP AND NOZZLE, I ONLY NEED TO BUY THE VOLTAGE CONTROLLER. WHAT CONTROLLER I NEED, VoltageController Intended to be attached to an 0-5 Volt Sensor OR DVC-30 Controller Intended for any boosted application. Built In 30 psi map sensor.

The voltage controller, the DVC-30 only works off of boost.