[hnm_26]

Which is better and inside or outside nozzle

[hnm_26]

What nozzle size do i need for my car
2005 JDM Subaru Legacy GT, 2.0 L aprox 300 hp.

================
Inputs
================
RPM 7000
Max Boost 18
Liters 2.0

================
Injector
================
3.73 gph of fluid flow needed @ 150 psi

================
Other Info
================
CFM 467
BTU 537

[dvldoc]

Originally Posted by hnm_26 What nozzle size do i need for my car 2005 JDM Subaru Legacy GT, 2.0 L aprox 300 hp. ================ Inputs ================ RPM 7000 Max Boost 18 Liters 2.0 ================ Injector ================ 3.73 gph of fluid flow needed @ 150 psi ================ Other Info ================ CFM 467 BTU 537

With the new pump the DO3 nozzle will cover you up to 21psi with no problem.

[hnm_26]

Thanks for the info, but i bought a D05 because on your site i saw where the subaru kit came with D05 and D07; is this gonna be too much for my car

[dvldoc]

That kit is kind of targeted more for STI's and modded WRX's which tend to run more timing and these guys tend to turn up the boost to about 25psi+. The D05 will still be fine with the new pump and a controller, You can simply turn the psi down to 150 on the pump and use the controller to tweak it. I would up the boost at least 2 to 3psi on that stock motor.

[hnm_26]

Thanks man...
I am thinking about running a pre-turbo injector; what 2 nozzles do you recommend.

[dvldoc]

DO4 and D01 pre turbo.

Those engines like the alcohol

[infin]

used the calculator says i need a 8.09gph nozzle, for 7000 rpm, 2.7l, 24lbs. How does this calculator work if i am running 2 nozzles? get 2 4gph ones?

[dvldoc]

No you need 2 D03's

DO3 @ 200PSI = 4.24gph
D04 @ 200PSI = 5.66ghp

Remember the nozzles are quoted at 100psi.

[TYWRAP]

need help selecting a nozzle size.

Supra 2jzgte single turbo (Garret 60-1 .70AR)
3.0 liter
18 PSI street (up to 26PSi with race gas)

your pump (the 250 one )
DO10?


Thanks Doc!!