Alcohol Nozzle size Calculator

msfitoy · 07-18-2008

My Mini Cooper S is very modified (ported head, large valves, header,exhaust, pulley reduction, etc) and has the potential to reach 240whp with proper tune. The 1.6 is boosted to around 16-17psi with rev limited to 7500. Question is that I've been running a single M5 (5gph 50/50 mix) injector post intercooler and have experienced occasional misfire codes (one stage cooler plugs). The calculator calls for 2.8gph. Am I running too large an injector?

Also, is injecting prior to SC deleterious to the blower? Are there advantages/disadvantages as to where the injection takes place?

Thanks for your help!

greenie · 07-19-2008

Get ready,,,,,,,,,,,,
We want alcohol with out water.Dual fuel systems.Running alcohol/diesel 90/5-10%.
The injectors are before the turbo but with tanks of 20-100gals.Currently running 25-35 % alcohol through stock system.LOL Black smoke only .

greenie · 07-19-2008

Quote:

Originally Posted by greenie

Get ready,,,,,,,,,,,,
We want alcohol with out water.Dual fuel systems.Running alcohol/diesel 90/5-10%.
The injectors are before the turbo but with tanks of 20-100gals.Currently running 25-35 % alcohol through stock system.LOL Black smoke only .

Oh yah the power is off the wall.LOL

edzzed · 07-19-2008

Quote:

Originally Posted by greenie

Get ready,,,,,,,,,,,,
We want alcohol with out water.Dual fuel systems.Running alcohol/diesel 90/5-10%.
The injectors are before the turbo but with tanks of 20-100gals.Currently running 25-35 % alcohol through stock system.LOL Black smoke only .

i'm just learning about the benefits and pitfalls of water-alcohol-meth or any combination of them. i think i have learnt enough to know you do not put injectors before the turbo unless you wish to sandblast the turbo vanes.

Ed

greenie · 07-26-2008

In south America a carbarator is placed in front of the turbo to run on alcohol.
It works and Im trying to get one for my Diesel truck.I think I'll be able to use some of the equipment from here.Pumps & stuff.
Ward mag:claims Ford is going to do something soon.Im waiting.

Aristocat · 08-13-2008

Calculator isn't downloading for me!!!
Toyota Aristo Twin Turbo (2JZGTE)

RPM-6000
BOOST-17PSI
3.0L
What should I start with?

tushick · 08-17-2008

Quote:

Originally Posted by Aristocat

Calculator isn't downloading for me!!!
Toyota Aristo Twin Turbo (2JZGTE)

RPM-6000
BOOST-17PSI
3.0L
What should I start with?

nozzle: 5.43 gph
cfm: 582
BTU: 782

smoothasdee · 09-04-2008

whatz good guys

dvldoc · 09-04-2008

Quote:

Originally Posted by Aristocat

Calculator isn't downloading for me!!!
Toyota Aristo Twin Turbo (2JZGTE)

RPM-6000
BOOST-17PSI
3.0L
What should I start with?

Check your browser settings.

You should start out with the D04 nozzle with those specs, The D05 would be closer to 6.5gph. Remember the nozzles are rated at 100psi but the pump puts out much more than that.

ProjectSVO · 09-09-2008

Hi all, it's my first post.

I just got a kit & want to verify nozzle size so I dont blow anything up. So according to the calculator (see below) I need a D05 nozzle correct?

================
Inputs
================
RPM 6200
Boost 25
Liters 2.3
================
Injector
================
5.5 gph of fluid flow needed @ 100 psi
================
Other Info
================
CFM 578
BTU 792

TIA,
Andrew V

07-18-2008	#71 (permalink)
msfitoy Water Injection Newb Year: 2003 Make: mini Model: cooper s Join Date: Jul 2008 Posts: 1	Re: Alcohol Nozzle size Calculator My Mini Cooper S is very modified (ported head, large valves, header,exhaust, pulley reduction, etc) and has the potential to reach 240whp with proper tune. The 1.6 is boosted to around 16-17psi with rev limited to 7500. Question is that I've been running a single M5 (5gph 50/50 mix) injector post intercooler and have experienced occasional misfire codes (one stage cooler plugs). The calculator calls for 2.8gph. Am I running too large an injector? Also, is injecting prior to SC deleterious to the blower? Are there advantages/disadvantages as to where the injection takes place? Thanks for your help! Last edited by msfitoy; 07-18-2008 at 08:57 AM.

07-19-2008	#72 (permalink)
greenie Water Injection Newb Year: 1999 Make: ford Model: f 250 Join Date: Jul 2008 Posts: 5	Re: Alcohol Nozzle size Calculator Get ready,,,,,,,,,,,, We want alcohol with out water.Dual fuel systems.Running alcohol/diesel 90/5-10%. The injectors are before the turbo but with tanks of 20-100gals.Currently running 25-35 % alcohol through stock system.LOL Black smoke only .

07-26-2008	#75 (permalink)
greenie Water Injection Newb Year: 1999 Make: ford Model: f 250 Join Date: Jul 2008 Posts: 5	Re: Alcohol Nozzle size Calculator In south America a carbarator is placed in front of the turbo to run on alcohol. It works and Im trying to get one for my Diesel truck.I think I'll be able to use some of the equipment from here.Pumps & stuff. Ward mag:claims Ford is going to do something soon.Im waiting.

08-13-2008	#76 (permalink)
Aristocat Water Injection Year: 1992 Make: TOYOTA Model: ARISTO TWIN TURBO Join Date: Aug 2008 Posts: 18	Re: Alcohol Nozzle size Calculator Calculator isn't downloading for me!!! Toyota Aristo Twin Turbo (2JZGTE) RPM-6000 BOOST-17PSI 3.0L What should I start with? Last edited by Aristocat; 08-13-2008 at 01:48 PM.

09-04-2008	#78 (permalink)
smoothasdee Water Injection Newb Year: 2004 Make: dodge Model: neon Join Date: Sep 2008 Posts: 1	Re: Alcohol Nozzle size Calculator whatz good guys

09-09-2008	#80 (permalink)
ProjectSVO Water Injection Newb Year: 1984 Make: Ford Model: Turbo Coupe Join Date: Sep 2008 Posts: 1	Re: Alcohol Nozzle size Calculator Hi all, it's my first post. I just got a kit & want to verify nozzle size so I dont blow anything up. So according to the calculator (see below) I need a D05 nozzle correct? ================ Inputs ================ RPM 6200 Boost 25 Liters 2.3 ================ Injector ================ 5.5 gph of fluid flow needed @ 100 psi ================ Other Info ================ CFM 578 BTU 792 TIA, Andrew V