Registration is free.
Join us today.
Nozzle size
This is a discussion on "Nozzle size" within the Nozzle Size Calculator forums. This forum, and the thread "Nozzle size "are both part of the Downloads category;
 |
| | LinkBack | Thread Tools |
03-26-2008
| #1 (permalink) |
| Water Injection Newb Year: 1995 Make: Toyota Model: Soarer Join Date: Mar 2008
Posts: 7
|  Nozzle size
Hi I have just bought one of your Universal stage 2 kits (Progressive Controller to 3 bar) and my system is: 2.5 Ltr motor (1JZGTE) 8000rpm max running 25psi I will run 50/50 water/methanol. It comes on 25psi around 4000rpm I was wondering what nozzle I should go with? The calculator says 9.2gph but the pump is suppose to be more powerful now isn't it? I have the D03 (3 GPH - 189ml/min) and the D07 (7 GPH, 441ml/min) that came with the kit so obviously the D07, but do I need another nozzle? or should I add the D03 in-line or something? Also roughly what boost should I set the sysem to start and finish at? Thanks for your help, ALJ |
|  |
|
03-27-2008
| #2 (permalink) |
| DevilsOwn Staff  Join Date: Apr 2005
Posts: 1,966
| Re: Nozzle size
You should go with the M10 nozzle so you do not have to mount a second nozzle. For settings I would start at 7psi on and 18psi full then play with it from there.
__________________ Currently deployed to Ramadi 1 battalion 12th Marines see you in 8 months.  |
|
| |
|
03-27-2008
| #3 (permalink) |
| Water Injection Newb Year: 1995 Make: Toyota Model: Soarer Join Date: Mar 2008
Posts: 7
| Re: Nozzle size
Thanks dvddoc! So the calculator is right then, when it says 9.2GPH? I should be running a DO10 [2710] 10 GPH (630ml/min)? Last edited by alj; 03-27-2008 at 03:37 AM. Reason: info |
|
| |
