[rrussell]

I'm very happy with your digital controller system. Running a 50/50 water/meth mix.

I'm running a Forced Performance "Sleeper 16 G Turbo"
with the stock SMIC and piping.

Engine is a basic 1G with @ 2g pistons.
ARP Heads studs,balance shaft removal kit and still running stock cams.
Pretty much a low dollar setup.

I'm also running a wet cold fusion nitrous system.

My personal best so far is a 11.5 @ 119mph running a 75 shot on pump fuel.

I'm also using the DevilsOwn controller to activate the nitrous system.
Nitrous solenoids + side to the pumps + side. The nitrous arming switch is wired to ground.

It has worked flawless and I'm very pleased with the controller for activating the nitrous at any set psi.

Great for traction control for different track conditions.

[Dust]

Sounds like a good rig. Are your systems progressive?

[pacemkr86]

bad ass...

let see some engine pics

[rrussell]

Heres a link from our local forum with pics.
Spokane Speed Photo Gallery - Home > Spokane Speed Members > rrussell

Thanks for the kind words. Its a single wet fogger non progressive nitrous system.

[pacemkr86]

is that a 15lb bottle?? thanks for sharing the pics.. nice ride !!

[rrussell]

Originally Posted by pacemkr86

is that a 15lb bottle?? thanks for sharing the pics.. nice ride !!

No LOL

Its a old style 10lb. bottle I had laying around and put it back in use.

[pacemkr86]

i havent seen the long skiny bottle in a few years..

what aize alcohol nozzles are you running?

[rrussell]

I'm running a 5gph nozzle as of now. should I go bigger when running a 100%meth?

[pacemkr86]

can you moniter knock ? i usally run as much aslky as it takes to get rid of knock and get my a/f ratio where i want it..

Are you using a wide band 02 sensor?

[rrussell]

As of now I'm not getting any knock. But when I turn up the boost it could be a different story.

I'm running an Innovate Wide band with the LMA3 aux box.