[escobar]

G'day Guys
Settin up a new project at the moment here in Oz and wanted to ask
a few questions, planning on running a stage 2 univirsal kit connected to a tps on my race demon, that side of things is too easy but size recommendations seem to be a sticking point, better to run twin nozzles under the base plate???? tuning then seems to get expensive if I have to buy half a dozen pairs of nozzles of each size so I was wondering if anyone had something similar that they had played with, she's a 327 sb full port fullies, 575 odd lift solid , 12:1 cr and 650 speed demon. last dynod on avgas @ 522 hp @ flywheel but detionation on pump fuel here in oz will kill her (did I type fuel, I mean watery looking cat piss of a grade so low youd have to spike it to start a fire in newspaper) Oh I brew my own ethonol in reasonable volumes @ 186 proof or 93%, illegal to run straight on the street but is it suitable to use in you kit or at all ?????
Thanks for all info on site been very helpful. last do you guys do paypal??? cheers Paul

[dvldoc]

Originally Posted by escobar G'day Guys Settin up a new project at the moment here in Oz and wanted to ask a few questions, planning on running a stage 2 univirsal kit connected to a tps on my race demon, that side of things is too easy but size recommendations seem to be a sticking point, better to run twin nozzles under the base plate???? tuning then seems to get expensive if I have to buy half a dozen pairs of nozzles of each size so I was wondering if anyone had something similar that they had played with, she's a 327 sb full port fullies, 575 odd lift solid , 12:1 cr and 650 speed demon. last dynod on avgas @ 522 hp @ flywheel but detionation on pump fuel here in oz will kill her (did I type fuel, I mean watery looking cat piss of a grade so low youd have to spike it to start a fire in newspaper) Oh I brew my own ethonol in reasonable volumes @ 186 proof or 93%, illegal to run straight on the street but is it suitable to use in you kit or at all ????? Thanks for all info on site been very helpful. last do you guys do paypal??? cheers Paul

You will only really need a single nozzle, The controller will allow you to tune the nozzle size you will use a 5gph nozzle with your set up or dual 2gph nozzles if you wanted to.. And yes you can run your home brew through the kit with no problems. @93% it would be like running on 110 octane if your had 91 at the pump. You can be assured detonation will not be a factor