This is a discussion on "newbee with dumb question" within the Off-Topic Discussion forums. This forum, and the thread "newbee with dumb question "are both part of the General Performance category;
| | LinkBack | Thread Tools |
| | #1 (permalink) |
| Water Injection Newb Year: 1999 Make: mazda Model: miata Join Date: Jun 2008
Posts: 1
|
I just received the universal kit to install in my 99 supercharged miata (9.5 psi at 7g). The kit came with 2 nozzles, what and how could I tell their size? I know there is a number on the nozzles but it is in a strange code or I am looking at it upside down? My other question is that I am installing the DO in replacement of an air-to-air intercooler. I am maxed out of fuel now at 6000 rpm. I am getting a new chip for that, should I wait for the chip? Or go a head and install the system now? |
| | |
| | #2 (permalink) |
| DevilsOwn Staff Join Date: Apr 2005
Posts: 1,966
|
The nozzles are marked DO2, DO3 ect. The number is how many gallons per minute at 100psi. Did you request specific nozzles when you ordered? For the Miata I would use either the DO2 or DO3 nozzles. You can install the kit now, Methanol is fuel and will give you what you need at your top end, it's like adding larger injectors. Just scan the vehicle. |
| | |