1/4 Mile Times

dvldoc · 04-26-2005

Lets see some 1/4 mile numbers. Post up your before and after alcohol injection 1/4 mile times if avalable.

slopoke · 04-28-2005

12.4 @ 111mph on the old setup.
New setup vids and times to come.
Looking to get the cage installed in May :o

paljets · 05-09-2005

Add the times to the Garage..

You can list your mods there too..

--paul

zarnach · 05-10-2005

Dang Paul. I seen your reply under 1/4 mi times and thought you had some numbers. Are you set up now or what?

BadAndy · 05-17-2006

ran 13.947 on old setup without alcohol kit putting the alcohol kit on today goingto try and run it at the track this weekend and have new numbers soon

blownprix99 · 08-19-2006

no grand prix any more but.........

before- 14.0@98

after- 13.4@104

This is with the same tune, pulley...ect... My ground just broke off before a run :(

dvldoc · 08-19-2006

That's a nice improvement, .6 seconds off your 1/4 for under $300 is not bad.

JezzaB · 08-23-2006

My best is a 12.1 @ 118.9MPH. The utes setup:

Its a aussie Holden VU SS (LS1 motor), Powerdyne blower @ 4 PSI (i was losing a pound), 4.11's and Try-Y's and no exhaust, stock stall.

Ive just put this kit on and am going to try 50/50 metho or what you guys call de-natured alcohol and a smaller pulley (around 7-8psi)

I have a crappy 1.86 60' and major wheelspin in 2nd with MT ET Street Radials but why not put some more power through

. I really need MT Streets now. Ill keep you updated on how i go with it if you would like? Its the fastest Powerdyne powered LS1 is Aus @ 12.1 but with this kit, pulley and some good tyres and a stallie im hoping to get that down to around 11.7

Jez

fst100 · 12-03-2007

60' 2.020
330 5.559
1/8 8.516
MPH 83.24
1000 11.049
1/4 13.190
MPH 105.36

mods:
1.9 mod rockers 3.2"-Headers-2.5"Pipes-stock muffs
LS1M/HappyKnob@18* of Timing/PowrTuner
AL103@0.040 alcohol w/m3 nozzle an Progressive Controller
180 T-Stat, 4"FWI/PortedTB/PnP M90
PLX-SMR WBo2

04-26-2005	#1 (permalink)
dvldoc DevilsOwn Staff Join Date: Apr 2005 Posts: 1,973	1/4 Mile Times Lets see some 1/4 mile numbers. Post up your before and after alcohol injection 1/4 mile times if avalable.

04-28-2005	#2 (permalink)
slopoke Alcohol Water Injection Join Date: Apr 2005 Posts: 68	Re: 1/4 Mile Times 12.4 @ 111mph on the old setup. New setup vids and times to come. Looking to get the cage installed in May :o

05-10-2005	#4 (permalink)
zarnach Water Injection Newb Join Date: Apr 2005 Posts: 10	Re: 1/4 Mile Times Dang Paul. I seen your reply under 1/4 mi times and thought you had some numbers. Are you set up now or what? __________________ http://www.azclubgp.com/garage_img.php?pic_id=99 View Mods Here

05-17-2006	#5 (permalink)
BadAndy Alcohol Injection Join Date: Apr 2006 Posts: 42	Re: 1/4 Mile Times ran 13.947 on old setup without alcohol kit putting the alcohol kit on today goingto try and run it at the track this weekend and have new numbers soon

08-23-2006	#8 (permalink)
JezzaB Water Injection Newb Join Date: Aug 2006 Posts: 3	My best is a 12.1 @ 118.9MPH. The utes setup: Its a aussie Holden VU SS (LS1 motor), Powerdyne blower @ 4 PSI (i was losing a pound), 4.11's and Try-Y's and no exhaust, stock stall. Ive just put this kit on and am going to try 50/50 metho or what you guys call de-natured alcohol and a smaller pulley (around 7-8psi) I have a crappy 1.86 60' and major wheelspin in 2nd with MT ET Street Radials but why not put some more power through . I really need MT Streets now. Ill keep you updated on how i go with it if you would like? Its the fastest Powerdyne powered LS1 is Aus @ 12.1 but with this kit, pulley and some good tyres and a stallie im hoping to get that down to around 11.7 Jez Last edited by JezzaB; 08-23-2006 at 07:45 AM.

05-09-2005	#3 (permalink)
paljets Water Injection Join Date: Apr 2005 Posts: 16	Add the times to the Garage.. You can list your mods there too.. --paul

08-19-2006	#6 (permalink)
blownprix99 Water Injection Newb Join Date: May 2005 Posts: 12	no grand prix any more but......... before- 14.0@98 after- 13.4@104 This is with the same tune, pulley...ect... My ground just broke off before a run :(

08-19-2006	#7 (permalink)
dvldoc DevilsOwn Staff Join Date: Apr 2005 Posts: 1,973	That's a nice improvement, .6 seconds off your 1/4 for under $300 is not bad.

12-03-2007	#9 (permalink)
fst100 Alcohol Water Injection Join Date: Apr 2006 Posts: 96	Re: 1/4 Mile Times 60' 2.020 330 5.559 1/8 8.516 MPH 83.24 1000 11.049 1/4 13.190 MPH 105.36 mods: 1.9 mod rockers 3.2"-Headers-2.5"Pipes-stock muffs LS1M/HappyKnob@18* of Timing/PowrTuner AL103@0.040 alcohol w/m3 nozzle an Progressive Controller 180 T-Stat, 4"FWI/PortedTB/PnP M90 PLX-SMR WBo2 __________________ 98GTP The Purple People Eater best ET=13.19 best trap=105.36 1.9 mod rockers 3.2"-Headers-2.5"Pipes-stock muffs LS1M/HappyKnob@18* of Timing/PT AL103@0.040 alcohol w/m3 nozzle an Controller 180Dr T-Stat, 4"FWI/PortedTB/PnP M90 PLX-SMR WBo2 Fuel Pump Rewire, AFC 2.2

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1/4 Mile Times	dvldoc	Turbocharged Engines	34	07-15-2008 07:37 PM
What sort of times to expect with the following mods?	shaferz	Technical Questions	1	08-03-2005 07:34 PM