Registration is free.
Join us today.
Need some help
This is a discussion on "Need some help" within the Supercharged Engines forums. This forum, and the thread "Need some help "are both part of the Engine Specific category;
 |
| | LinkBack | Thread Tools |
07-26-2007
| #1 (permalink) |
| Water Injection Newb Year: 1994 Make: honda Model: delsol Join Date: Jul 2007
Posts: 2
|  Need some help
hi! I`m new on forum and i must say i like this forum wery much. I have a few questions and i hope somebody can help me to solve my problems. I`m driving an 94 honda delsol with b16 engine with JRSC.I was running on 6psi and my friend tuned my car and everything was okey.Car was really quick and i had no problem.Then i install the Endyne altenator pulley and i came up to 9.5psi boost,but the car is much slower then with 6psi.We check everything on setup and after we start to tune we see that i have IAT when i push up to 125deg.C which is 257deg.F and we stop the street tune. I have preeinstall an methanol/water injection kit,so now i want to use it and here are my questions. 1.how much mixture to inject(i have install the nozzle after the SC),i have a 300cc nozzle? 2.which AFR is the best? 3.will my M/W kit reduce my IAT(intake air temperature) 4.when is it the best to inject?I mean at how many psi? 5.can somebody tell me which methanol to use?I work in an farmacy facktory and i have planty methanol which is 99.9% I hawe also a lot more questions,but i hope i will get answers on this one. Thanks in advance |
|  |
|
07-26-2007
| #3 (permalink) |
| DevilsOwn Tech Year: 86 Make: Buick Model: T Type  Join Date: Oct 2005
Posts: 644
 | Re: Need some help
the alcohol kit will reduce cyclinder temp and supress knock and detonation, which allows for more efficent boost im not familair with the honda setup, but can you moniter knock retard or knock counts.. |
|
| |
