This is a discussion on "plug gap...what is it again?" within the Supercharged Engines forums. This forum, and the thread "plug gap...what is it again? "are both part of the Engine Specific category;
| | LinkBack | Thread Tools |
| | #1 (permalink) |
| Alcohol Water Injection Join Date: Apr 2006
Posts: 95
| L67 with a vs cam and supporting mods. im trying to tune for 89octane and thus far im having some luck(just a bit of knock up top in PE mode). im running AL103 and i believe they are gapped at 0.044. im using an m2 nozzle and was wondering if the gap range i have is correct or should i increase the gap to 0.050? stock gapping with the copper plugs IIRC is 0.055-0.060 on non-alkied cars.
__________________ 98GTP The Purple People Eater best ET=13.19 best trap=105.36 1.9 mod rockers 3.2"-Headers-2.5"Pipes-stock muffs LS1M/HappyKnob@18* of Timing/PT AL103@0.040 alcohol w/m3 nozzle an Controller 180Dr T-Stat, 4"FWI/PortedTB/PnP M90 PLX-SMR WBo2 Fuel Pump Rewire, AFC 2.2 |
| | |
| | #3 (permalink) |
| Alcohol Water Injection Join Date: Apr 2006
Posts: 95
| good to know. thanks man
__________________ 98GTP The Purple People Eater best ET=13.19 best trap=105.36 1.9 mod rockers 3.2"-Headers-2.5"Pipes-stock muffs LS1M/HappyKnob@18* of Timing/PT AL103@0.040 alcohol w/m3 nozzle an Controller 180Dr T-Stat, 4"FWI/PortedTB/PnP M90 PLX-SMR WBo2 Fuel Pump Rewire, AFC 2.2 |
| | |
| Thread Tools | |
| |