Registration is free.
Join us today.
1/4" hose what PSI is running through the lines?
This is a discussion on "1/4" hose what PSI is running through the lines?" within the Technical Questions forums. This forum, and the thread "1/4" hose what PSI is running through the lines? "are both part of the General Performance category;
Devilsown Methanol Alcohol Water Injection
> General Performance
> Technical Questions 
1/4" hose what PSI is running through the lines?
 |
| | LinkBack | Thread Tools |
05-21-2007
| #1 (permalink) |
| Alcohol Water Injection Join Date: Apr 2006
Posts: 96
|  1/4" hose what PSI is running through the lines?
my hose lines are not the standard 1/8" as sold on devilsown. my lines are all 1/4" aside from the check valve which is 1/8"(has adapters on both sides) and my nozzle size is an M3. can anyone calculate how much pressure is being used? im somewhat going through a hectic time trying to run KR-free but only be able to run almost KR-free with a 10.7-11.0 on my WBo2. i was thinking if my lines and nozzle would play a role and make me run too rich? i tried leaning my fueling to command a 11.5 AFR but i get alot and constant knock. just curious if its a possibility. thanks in advance.
|
|  |
|
05-22-2007
| #2 (permalink) |
| DevilsOwn Staff  Join Date: Apr 2005
Posts: 2,058
| Re: 1/4" hose what PSI is running through the lines?
Even with the larger hose the nozzle makes it a non factor, The nozzle size plays the greatest role in output pressure on the hose. The 1/8 ID vs 1/4 id will be less than 15psi difference.
__________________ Currently deployed to Ramadi 1 battalion 12th Marines Task Force MP  |
|
| |
