Devilsown Methanol Alcohol Water Injection

Members Login
Results 1 to 6 of 6
  1. #1

    How do I get that blower-tb pin out??

    I'm trying to install the TB spacer and I am having troubles getting that little pin out that is on the blower. Any ideas / tips on getting that thing out??

    Thanks!
    Neil

  2. #2

    Re: How do I get that blower-tb pin out??

    Drill it :twisted:

  3. #3

    Re: How do I get that blower-tb pin out??

    Locking needle nose pliers

  4. #4

    Re: How do I get that blower-tb pin out??

    I did the whole locking pliers bit, PB Blaster, tons of pulling, drilling the pin out. 15 minutes later I realized it was a lot easier to drill the aluminum! Problem solved :mrgreen:

  5. #5
    Alcohol Water Injection
    Join Date
    May 2005
    Posts
    95

    Re: How do I get that blower-tb pin out??

    Quote Originally Posted by NeilsGTP @ Fri May 27, 2005 1:52 pm
    I did the whole locking pliers bit, PB Blaster, tons of pulling, drilling the pin out. 15 minutes later I realized it was a lot easier to drill the aluminum! Problem solved :mrgreen:
    LOL... I did about the same thing. I fought with it for 5 minutes and said fuck it. I just drilled another hole in the spacer.

    Now if only my controller would get here. :cry:

  6. #6

    Re: How do I get that blower-tb pin out??

    Me and my friend saw that little pin sticking out and we're like F pulling it out...we just took a hammer and tapped it back into the hole. That should help some people that don't want to drill or can't pull it out.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •