Registration is free.
Join us today.
AEM Error
This is a discussion on "AEM Error" within the Technical Questions forums. This forum, and the thread "AEM Error "are both part of the General Performance category;
 |
| | LinkBack | Thread Tools |
06-03-2008
| #1 (permalink) |
| Water Injection Newb Year: 1996 Make: Toyota Model: Supra SZR NA-T Join Date: Jan 2008
Posts: 11
|  AEM Error
Hi guys. I have a problem with my AEM WI controller, and this forum i think is one of the best places to get help  I just connected everything but when i turn on the ignition i get a error code, and it says that i have a Pump Driver Shorted. Trigger condition: Current exceeding 15amp on the driver output. Driver output? Also on the pump itself it says use a 15amp fuse but where to put the fuse. Here is a link to the user manual. http://www.aempower.com/images/produ...%2010-3000.pdf |
|  |
|
06-03-2008
| #2 (permalink) |
| DevilsOwn Staff  Join Date: Apr 2005
Posts: 1,968
| Re: AEM Error
If the pump is not on you should not be seeing any amps. You should put the fuse inline with the power wire from the controller but not the wire going from the controller to the pump that does the PWM. Other than that I have no ideal how there unit is set up and why you would get those errors if the pump is not activated. You should contact there customer service. You can also try using a relay to activate the controller instead of hooking it strait to power and see what happens.
__________________ Currently deployed to Ramadi 1 battalion 12th Marines see you in 8 months.  |
|
| |
|
06-04-2008
| #3 (permalink) |
| Water Injection Newb Year: 1996 Make: Toyota Model: Supra SZR NA-T Join Date: Jan 2008
Posts: 11
| Re: AEM Error
Hehe..feel kinda like a dumbass now  I had no fluid in my tank when i activated the controller and my float switch was activated..... What should my af be like when i'm using wi. I have it set to start spraying at 11psi and running at max at 19/20psi. My af at wot is about 10.9-11.2 |
|
| |
