alcohol problems

SLPGTP · 05-27-2005

http://www.clubgp.com/newforum/tm.as...mode=1&smode=1

That's a carryover from ClubGP to the problems I've been having. This is really starting to get frustrating cuz it should be working by now.

What plug gaps have you all been running?

Thanks.

Aaron

slopoke · 05-27-2005

Did you get dlvs pm on the blinking fix and did you do it? Also tell me what your setup consists of? Plugs, pulley size, timing, pcm, mods etc?

SLPGTP · 05-27-2005

I'm running a custom DHP PCM with the 0300 code deleted, ICCU ready (no ICCU though); 3.0 pulley; S&S headers; ported TB; 160* t-stat; Thrasher CAI

I've been seeing around 7-8* of KR but it's been false because the O2 sensor on my U-bend delete was banging up against the heat shield under the car. It was pulling timing down to 4-5*. I think that should be everything you wanted.

slopoke · 05-27-2005

did you perform the fix on the controller?

SLPGTP · 05-27-2005

No I haven't done that yet. I'm no good at soldering so my buddy is going to do that for me so I don't know when that will be.

05-27-2005	#1 (permalink)
SLPGTP Water Injection Newb Join Date: May 2005 Posts: 9	Alky problems http://www.clubgp.com/newforum/tm.as...mode=1&smode=1 That's a carryover from ClubGP to the problems I've been having. This is really starting to get frustrating cuz it should be working by now. What plug gaps have you all been running? Thanks. Aaron

05-27-2005	#2 (permalink)
slopoke Alcohol Water Injection Join Date: Apr 2005 Posts: 68	Re: Alky problems Did you get dlvs pm on the blinking fix and did you do it? Also tell me what your setup consists of? Plugs, pulley size, timing, pcm, mods etc?

05-27-2005	#3 (permalink)
SLPGTP Water Injection Newb Join Date: May 2005 Posts: 9	Re: Alky problems I'm running a custom DHP PCM with the 0300 code deleted, ICCU ready (no ICCU though); 3.0 pulley; S&S headers; ported TB; 160* t-stat; Thrasher CAI I've been seeing around 7-8* of KR but it's been false because the O2 sensor on my U-bend delete was banging up against the heat shield under the car. It was pulling timing down to 4-5*. I think that should be everything you wanted.

05-27-2005	#4 (permalink)
slopoke Alcohol Water Injection Join Date: Apr 2005 Posts: 68	Re: Alky problems did you perform the fix on the controller?

05-27-2005	#5 (permalink)
SLPGTP Water Injection Newb Join Date: May 2005 Posts: 9	Re: Alky problems No I haven't done that yet. I'm no good at soldering so my buddy is going to do that for me so I don't know when that will be.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STAGE 1 Controllers almost completed ran into some parts problems	copgtp	Technical Questions	4	04-26-2005 02:22 PM