Registration is free.
Join us today.
Cobalt SS Progessive Kit
This is a discussion on "Cobalt SS Progessive Kit" within the Technical Questions forums. This forum, and the thread "Cobalt SS Progessive Kit "are both part of the General Performance category;
Devilsown Methanol Alcohol Water Injection
> General Performance
> Technical Questions 
Cobalt SS Progessive Kit
 |
| | LinkBack | Thread Tools |
10-04-2008
| #1 (permalink) |
| Water Injection Newb Year: 2006 Make: Chevy Model: Cobalt SS/SC Join Date: Oct 2008
Posts: 3
|  Cobalt SS Progessive Kit
Hey Guys. I was wondering if I have to have a vaccum line ran or if it reads psi from the map sensor? THis is the kit i bought Cobalt SS / Redline Stage 2 Sku: [5112], it comes with the 2 bar controller right? Also I have a few nozzle ?'s. The first one is when i tap my intake and screw the nozzle in should there be a nut on the bottom side? if so my kit didnt have a nut in it. And the second is, if you unscrew the screen part of the nozzle there is a brass piece inside, do you remove that or leave it in? Last edited by chood711; 10-04-2008 at 10:28 PM. |
|  |
|
10-05-2008
| #2 (permalink) |
| Alcohol Holic Year: 1999 Make: Daihatsu Model: Move Join Date: Mar 2007
Posts: 330
 | Re: Cobalt SS Progessive Kit
The brass piece stays, and you run a wire from your map sensor to the controller.
__________________ 1999 Daihatsu Move 660cc's of pure boredom DO Progressive going on soon. |
|
| |
|
10-05-2008
| #3 (permalink) | |
| Water Injection Newb Year: 2006 Make: Chevy Model: Cobalt SS/SC Join Date: Oct 2008
Posts: 3
| Re: Cobalt SS Progessive Kit Quote:
| |
|
| |
